Thank you and congratulations on adding ArmourX™ to your home.

Please follow this care and maintenance guide to help keep your ArmourX security screens looking and performing at their best. The maintenance period may differ depending on your surrounding environmental elements; refer to the below maintenance table as a general guide. 

Overview: Care and Maintenance Guide

Guide

• The removal of dirt, dust and grime regularly through general cleaning is essential.

• This can be easily done by using a mild detergent, warm water and a non-abrasive brush or cloth.

• Loose deposits can be removed with a wet sponge.

• Rinse with clean water and dry with a clean cloth.

• Do not use strong detergents or harsh cleaners as these can damage the powder coat finish of your screen; increasing the likelihood of corrosion.

Keep key cylinders lubricated through annual maintenance or if there are signs of roughness when inserting or retracting the key.

• Remove dirt, grime and salt deposits around the exterior of the cylinder.

• Apply a small amount of Inox MX3 to your key only. Insert and retract the key from the lock barrel to provide a smooth action.

DO NOT SPRAY DIRECTLY INTO LOCK BARREL. DO NOT USE WD40 OR OTHER OIL BASED LUBRICANTS

NOTE: Lack of regular cleaning can result in fungal growth or the accumulation of other contaminants on the mesh, potentially requiring more intensive cleaning and increasing the risk of permanently damaging or discolouring the powder coating.

If you have any further questions about the care and maintenance of your ArmourX security screen, please contact us.

Download attachments